Novinka:Rabbit: MiniCore™ RCM5700
(Kategória: Čo by Vás mohlo zaujať)
Zaslal EdizonTN
03.11.2009-00:55

Modul RCM5700 je cenovo dostupný vývojový kit,
s pomocou ktorého jednoducho doplníte 10/100Base-T ethernet konektivitu, do Vašej aplikácie.

Tento vývojový kit obsahuje MCU Rabbit® 5000, 1MB FLASH a low- power PHY ICS1893.

Vlastnosti
  • Microprocessor: Rabbit® 5000 @ 50 MHz
  • EMI Reduction: Spectrum spreader for reduced EMI (radiated emissions)
  • Ethernet Port: 10/100Base-T
  • Flash Memory: 1 MB
  • SRAM: 128 KB (Rabbit® 5000 on-chip)
  • Backup Battery: Connection for user-supplied backup battery (to support RTC)
  • General-Purpose I/O: Up to 35 parallel digital I/0 lines configurable with 4 layers of alternate functions
  • Additional Inputs: Reset in
  • Additional Outputs: Status, reset out
  • External I/O Bus: Can be configured for 8 data lines and 6 address lines (shared with parallel I/O lines), plus I/O read/write
  • Serial Ports: 6 high-speed, CMOS-compatible ports:
    - All 6 configurable as asynchronous (with IrDA), 4 as clocked serial (SPI), and 2 as SDLC/HDLC
    - 1 asynchronous clocked serial port shared with programming port
  • Serial Rate: Maximum asynchronous baud rate = CLK/8
  • Slave Interface: Slave port allows the RCM5700 to be used as an intelligent peripheral device slaved to a master processor
  • Real-Time Clock: Yes
  • Timers: Ten 8-bit timers (6 cascadable from the first), one 10-bit timer with 2 match registers, and one 16-bit timer with 4 outputs and 8 set/reset registers
  • Watchdog/Supervisor: Yes
  • Pulse-Width Modulators: 4 channels synchronized PWM with 10-bit counter 4 channels variable-phase or synchronized PWM with 16-bit counter
  • Input Capture: 2-channel input capture can be used to time input signals from various port pins
  • Quadrature Decoder: 2-channel quadrature decoder accepts inputs from external incremental encoder modules
  • Power: 3.15 - 3.45V DC
    -70mA @ 3.3V (without Ethernet)
    -200mA @ 3.3V (with Ethernet)
  • Operating Temperature: –40° C to +85° C
  • Humidity: 5% to 95%, noncondensing
  • Connectors: Edge connectors for interface with 52-pin mini PCI Express socket
  • Board Size: 30 mm × 51 mm × 3 mm


Verzie RCM5700
Kit sa dodáva v dvoch prevedeniach (a tomu odpovedajúcich cenách):
  • Standard Development Kit (101-1274) obsahuje:
    • Interface Board with standoffs/connectors.
    • Prototyping Board with standoffs/connectors.
    • USB cable to program RCM5700 via Interface Board.
    • Dynamic C CD-ROM, including product documentation on disk.
    • Getting Started instructions.
    • Registration card.

  • Deluxe Development Kit (101-1275) obsahuje:
    • Standard Development Kit (101-1274)
    • Universal AC adapter, 5 V DC, 2 A (includes Canada/Japan/U.S., Australia/N.Z., U.K., and European style plugs). Development Kits sold in North America may contain an AC adapter with only a North American style plug.
    • Digital I/O and Serial Communication accessory boards for use with certain sample programs.
    • CAT 5/6 Ethernet cable and DB9 to 10-pin header serial cable.
    • Rabbit 5000 Processor Easy Reference poster.


*verzia RCM5710 obsahuje naviac aj RJ45 konektor.

Software
Dynamic C® Software (súčasťou dodávky) je IDE s C kompilérom, určené na vývoj a ladenie aplikácií s MCU Rabbit.
Na CD nájdete aj real-time operačný systém μC/OS-II, point-to-point protocol (PPP), FAT file system, RabbitWeb a ďaľšie knižnice.
Dokúpiť si môžete ešte "Rabbit Embedded Security Pack" obsahujúci Secure Sockets Layer (SSL) a knižnicu Advanced Encryption Standard (AES).

Odkazy


Cena
Cena podľa výrobcu Rabbit je:
99,- USD za Standard Development Kit (101-1274) - modul MiniCore™ RCM5700
199,- USD za Deluxe Development Kit (101-1275) - modul MiniCore™ RCM5700

Distribúcia
viď. Adresár *skúšobne, iba pre členov



Táto novinka je z mikroZONE
( http://www.mikrozone.sk/news.php?extend.171 )